|

12メートル検診車

製品概要

Configure one set of electric sliding doors in the CT area and operating area. Install one set of 400*600*20 lead glass on the electric sliding doors.

商品画像

商品詳細

Vehicle Configuration Parameters:  
Basic ParametersLength (mm)12000 Wheelbase (mm)6300 
Width (mm)2550 Curb Weight (kg)15000, 16000, 17200
Height (mm)36,003, 690Gross Vehicle Weight (kg)18000 
Rated Passenger Capacity (persons)2-9
ItemStandard Configuration
Chassis ConfigurationEngineYCK08330-60
Power (kW)243 
Displacement (ml)7698 
TransmissionDomestic Manual Six-Speed
Service BrakeFront Disc, Rear Drum, Dual-Circuit Air Brake
Parking BrakeEnergy Storage Spring Parking Brake
Auxiliary BrakeRetarder
Steering GearPower Steering
Anti-lock Braking System (ABS)German W ABC O ABS
Suspension System10/12 Multi-leaf Springs, Imported Six Air Bags (Front and Rear Outward Swing)
Tires295/80R22.5 Tubeless Radial
Fuel Tank260L
Body ConfigurationRearview MirrorsElectric
Inner SurfaceFiberboard Covered with Leather
Side WindowsThe last two side windows are built-in sliding type, others are fully enclosed tempered glass
Passenger DoorsPneumatic outward-swinging doors, with remote control lock
Driver’s SeatLeather mechanical, shock-absorbing high-back, three-way adjustable
SunroofOne (with ventilation fan)
Luggage Compartment DoorTop-hinged aluminum alloy
Serial NumberTechnical Performance特定のパラメーターQuantity
Balancing Support SystemKey balance hydraulic support balance system, technical requirements are as follows:
1. Supply Voltage: DC24V
2. Support Cylinder: Single cylinder support force ≥8 tons, stroke ≥450mm
3. Pump Displacement: ≥2.5ml/r
4. Working Pressure: ≥16MPa (single cylinder lifting force 8 tons)
5. Maximum Pressure Resistance: 21MPa
6. Motor Power: ≥2kW
7. Oil Tank Capacity: ≥8L
8. Safety Valve: 0~16MPa adjustable
9. Equipped with a one-button automatic leveling system, press the leg to uneven ground to achieve automatic
leveling.
10. Main hydraulic components use imported components: operating temperature -40°~55°C.
11. Leg not retracted voice alarm.
1 set
2. Control Room1. The CT area and operating area are equipped with one set of electric sliding doors, and the electric sliding doors are installed
with one set of 400*600*20 lead glass.
2. The CT area and operating area are isolated by steel frame welding, and 800*600*20 lead glass is installed on the partition wall.
one set.
3. Equipped with a workbench, the workbench surface is made of chemical board, and there are five-hole sockets under the table
sockets, with USB five-hole sockets and network ports.
4. Equipped with 1.5P air conditioner.
5. Equipped with CT area monitoring screen.
6. Equipped with a centralized power management panel for electrical control.
7. Equipped with CT room temperature and humidity sensor.
1 set
3. Rest AreaThere is a rest bed at the rear of the operating area, with a sponge pad on the bed. There is a
storage cabinet under the bed.
1 set
4. CT Room1. The room (CT examination area) is equipped with one electric lead-shielded protective door, for medical
When approaching the equipment room, there is a radiation warning sign above the door, and it has a manual and electric switching function:
2. The equipment room is equipped with one electric lead-shielded protective door (≥800mm) for patients to enter and exit the room. There is a radiation warning sign above the door, and it has a manual and electric switching function.
3. The patient’s outer doors have windproof support rods, an exterior light above the door, and an electric rotating step is installed at the bottom of the door.
能。
3.患者上下外门带防风撑杆,门上方设有外照明灯,门下部安装电
动翻转踏步。
4.  CT room dimensions: Length: 6200mm Width: 2360mm
1 set

Keywords: 12-meter medical examination vehicle

ビジネスのお問い合わせ

フルネームを入力してください。.
このフィールドは必須です。.
お問い合わせの詳細をご記入ください。.
このフィールドは必須です。.
このフィールドは必須です。.

類似投稿