12톤 압축 쓰레기 트럭

제품 개요

압축 박스 조립: 탄소강판(박스 본체 강도 Q345B 이상 또는 고강도 내후성 강판, 판 두께 4mm, 실제 판 두께 3.75mm 이상)

제품 이미지

제품 세부 정보

제품 특징

1. Compression Box Assembly: Carbon steel plate (body strength not less than Q345B or high-strength weathering steel plate, plate thickness is 4mm, actual plate thickness not less than 3.75mm);
2. Filler Assembly: The whole adopts carbon steel plate (side plate with strength not less than Q345B or high-strength weathering steel plate, plate thickness is 4mm, bottom plate with wear-resistant plate thickness 6mm)
3. Tail Control: Uses Eaton button panel from the USA, with remote control, vehicle-grade standard, low failure rate;
4. Photoelectric Switch: Uses Shanghai-SODILON, failure rate below 3‰;
5. Compaction Valve: Effectively improves the garbage compression ratio, the core component of the compression vehicle;
6. Electrical Control Box Assembly: Uses Changsha-Forli CNA bus technology, with diagnostic function;
7. Cab Control: Uses CAN bus control panel, vehicle standard, low failure rate;
8. Hydraulic Cylinder: Uses Topsoe customized cylinder, failure rate below 3‰;
9. Gear Pump: Uses Anhui-Wan Liquid or Jiashan-Pawa cast iron pump, compared with aluminum shell pump, the pump is more resistant to high pressure and has a longer life;
10. Power Take-off: Uses original factory or Jiashan-power take-off, avoiding tooth damage, oil leakage and other faults;
11. Air Source Three-piece Set: Uses Taiwan-AirTAC, including pressure reducing valve, filter, oil mist eliminator;
12. Multi-way Valve: Uses Yangzhou-Zhongmei integral valve, effectively reducing inter-slice oil leakage, increasing valve body diameter, and effectively reducing valve sticking.

Keywords: 12-ton compacting garbage truck

비즈니스 문의