7.3톤 음식물 쓰레기 트럭
제품 개요
The appearance is beautiful and generous. The horizontal cross-section of the trash can is square and round, and the vertical cross-section is a rectangular frame. Both sides are arc-shaped, making the whole machine look beautiful.
제품 이미지
제품 세부 정보
주요 성능 및 기능:
1. Beautiful and generous appearance, the horizontal cross-section of the trash can is square and round, the longitudinal cross-section is a rectangular frame, both sides are arc-shaped, the whole machine looks beautiful and generous.
2. The body is made of high-quality carbon steel, with a thickness of 4mm at the bottom and 4mm on the sides. The body is divided into two compartments: the upper compartment is for solid waste, and the lower compartment is for settling wastewater. The upper part of the wastewater tank is a filter net (made of stainless steel), used to collect the liquid after solid-liquid separation. The upper front part of the body is a clean water storage tank, used for cleaning vehicles, etc.;
3. The clean water tank is made of 304 stainless steel with a thickness of 3mm. A fire hydrant interface is set on the front right of the body, used for flushing residual garbage in the wastewater tank, etc.; a large-diameter discharge ball valve is set on the rear right of the body, used for discharging liquid garbage in the wastewater tank;
4. Good sealing between the trash can and the rear door assembly, using imported silicone rubber sealing, good sealing, eliminating secondary pollution.
5. High reliability and safety, using electro-hydraulic combined control, and a foolproof device is set to ensure the accurate and reliable operation of each mechanism.
6. 후방에 후진 카메라가 설치되어 있고 운전석에는 후진 디스플레이 화면이 장착되어 있습니다. 디스플레이 화면 크기는 7인치이며 적외선 기능이 있어 더욱 편리하게 조작할 수 있습니다.
7. 주요 구성 요소는 모두 국내 또는 해외 유명 제조업체의 제품입니다:
후면 컨트롤: 차량 등급 표준인 미국 Eaton 버튼 패널을 사용하며 고장률이 낮습니다;
광전 스위치: 상하이 솔드래곤 사용, 고장률 3‰ 미만;
압축 밸브: 음식물 쓰레기 트럭의 핵심 구성 요소인 쓰레기 대 음식물 쓰레기 비율을 효과적으로 개선합니다;
전기 제어 박스 어셈블리: 진단 기능이 있는 창사-포리 CNA 버스 기술을 사용합니다;
운전실 제어: 차량 표준인 CAN 버스 제어판을 사용하며 고장률이 낮습니다;
유압 실린더: 맞춤형 실린더 사용, 고장률 3‰ 미만;
Gear pump: Uses Anhui-Wan liquid or Jiashan-Pawa cast iron pump, superior to aluminum shell pump;
Power take-off: Uses original factory or Jiashan power take-off, avoiding gear breakage and oil leakage;
공기 소스 3종 세트: 감압 밸브, 필터, 오일 미스트 제거기 등 대만 Adtek 제품을 사용합니다;
다방향 밸브: 양저우-중메이 일체형 밸브를 사용하여 플레이트 간 오일 누출을 효과적으로 줄입니다.
| 이름 | 발표 모델 | 사양/주요 기술 파라미터 |
| 7-ton food waste truck | TPS5070TCAG6 | Overall dimensions: 5995×2195×2650(mm) |
| 섀시 모델: EQ1075SJ3CDF(동펑 D6) | ||
| 연료 유형: 디젤 | ||
| 배출 기준: 국가 VI | ||
| Gross weight: 7360Kg | ||
| Curb weight: 4950Kg | ||
| Rated load: 2280 | ||
| Number of cab occupants: 2 | ||
| 엔진 모델: 광시 유차이 기계 유한 공사. YCY24140-60 | ||
| Power (kw)/Horsepower (PS): 103/140.08 | ||
| Engine displacement (ml): 2360 | ||
| Transmission: Wanliyang 6-speed | ||
| Maximum speed (Km/h): 110 | ||
| Approach angle/Departure angle: 27.7/15 | ||
| Front overhang/Rear overhang: 1055/1632 | ||
| 휠베이스: 3308 | ||
| 액슬 수입니다: 2 | ||
| Tire specifications: 7.00R16 | ||
| Effective volume of the body: 5 (m3) | ||
| Wastewater tank capacity: 350L | ||
| Clean water tank capacity: 250L | ||
| 체형: 사각 탱크 | ||
| 본체 재질: 탄소강 / 옵션 304 스테인리스 스틸 | ||
| Discharge method: Push-out discharge /Optional spiral discharge | ||
| Push-out discharge time (s): ≤40s | ||
| Spiral discharge time (s): ≤240s | ||
| 버킷 팁 시간(초): ≤8초 | ||
| 버킷 배치 시간(초): ≤7초 | ||
| 후면 덮개 열기 시간(초): ≤10초 | ||
| 후면 커버 잠금 방식: 유압 잠금 | ||
| Control method: Manual/Electric /Remote control | ||
| 유압 시스템의 최대 압력(MPa): 16 | ||
| 버킷 리프팅 메커니즘: 120, 240L 쓰레기통 |
그리고 7.3톤 음식물 쓰레기 트럭 is a remarkable vehicle designed specifically for the efficient collection and transportation of food waste.
This truck is built with a robust chassis that can handle the substantial weight of up to 7.3 tons. Its large capacity allows for significant amounts of food waste to be collected in a single trip, reducing the number of trips required and thus saving time and fuel.
The body of the truck is made from high – quality, durable materials that are resistant to corrosion. This ensures a long lifespan even when exposed to the often – harsh conditions associated with waste handling.
Equipped with advanced loading mechanisms, it can easily load food waste from various sources such as restaurants, cafeterias, and food processing plants. The loading process is quick and seamless, minimizing disruption at the collection points.
For safety, the truck is designed with proper lighting and signage. The brakes and suspension are engineered to provide a stable and safe ride, even when fully loaded.
Inside, the compartment is designed to prevent leakage and odors from escaping. This helps to maintain a clean and hygienic environment during transportation.
In terms of environmental friendliness, the 7.3-ton food waste truck plays an important role in diverting food waste from landfills, contributing to more sustainable waste management practices.
Keywords: 7.3-ton food waste truck
