|

12미터 건강 검진 차량

제품 개요

Configure one set of electric sliding doors in the CT area and operating area. Install one set of 400*600*20 lead glass on the electric sliding doors.

제품 이미지

제품 세부 정보

Vehicle Configuration Parameters:  
기본 매개변수길이(mm)12000 휠베이스(mm)6300 
너비(mm)2550 연석 무게(kg)15000, 16000, 17200
높이(mm)36,003, 690차량 총 중량(kg)18000 
Rated Passenger Capacity (persons)2-9
항목표준 구성
섀시 구성엔진YCK08330-60
전력(kW)243 
변위(ml)7698 
전송Domestic Manual Six-Speed
서비스 브레이크프론트 디스크, 리어 드럼, 듀얼 회로 에어 브레이크
Parking BrakeEnergy Storage Spring Parking Brake
보조 브레이크Retarder
Steering GearPower Steering
Anti-lock Braking System (ABS)German W ABC O ABS
서스펜션 시스템10/12 Multi-leaf Springs, Imported Six Air Bags (Front and Rear Outward Swing)
타이어295/80R22.5 Tubeless Radial
연료 탱크260L
본문 구성백미러Electric
Inner SurfaceFiberboard Covered with Leather
Side WindowsThe last two side windows are built-in sliding type, others are fully enclosed tempered glass
승객 도어Pneumatic outward-swinging doors, with remote control lock
운전석Leather mechanical, shock-absorbing high-back, three-way adjustable
선루프One (with ventilation fan)
트렁크 도어상단 힌지 알루미늄 합금
Serial NumberTechnical Performance특정 매개변수Quantity
Balancing Support SystemKey balance hydraulic support balance system, technical requirements are as follows:
1. Supply Voltage: DC24V
2. Support Cylinder: Single cylinder support force ≥8 tons, stroke ≥450mm
3. Pump Displacement: ≥2.5ml/r
4. Working Pressure: ≥16MPa (single cylinder lifting force 8 tons)
5. Maximum Pressure Resistance: 21MPa
6. Motor Power: ≥2kW
7. Oil Tank Capacity: ≥8L
8. Safety Valve: 0~16MPa adjustable
9. Equipped with a one-button automatic leveling system, press the leg to uneven ground to achieve automatic
leveling.
10. Main hydraulic components use imported components: operating temperature -40°~55°C.
11. Leg not retracted voice alarm.
1 set
2. Control Room1. The CT area and operating area are equipped with one set of electric sliding doors, and the electric sliding doors are installed
with one set of 400*600*20 lead glass.
2. The CT area and operating area are isolated by steel frame welding, and 800*600*20 lead glass is installed on the partition wall.
one set.
3. Equipped with a workbench, the workbench surface is made of chemical board, and there are five-hole sockets under the table
sockets, with USB five-hole sockets and network ports.
4. Equipped with 1.5P air conditioner.
5. Equipped with CT area monitoring screen.
6. Equipped with a centralized power management panel for electrical control.
7. Equipped with CT room temperature and humidity sensor.
1 set
3. Rest AreaThere is a rest bed at the rear of the operating area, with a sponge pad on the bed. There is a
storage cabinet under the bed.
1 set
4. CT Room1. The room (CT examination area) is equipped with one electric lead-shielded protective door, for medical
When approaching the equipment room, there is a radiation warning sign above the door, and it has a manual and electric switching function:
2. The equipment room is equipped with one electric lead-shielded protective door (≥800mm) for patients to enter and exit the room. There is a radiation warning sign above the door, and it has a manual and electric switching function.
3. The patient’s outer doors have windproof support rods, an exterior light above the door, and an electric rotating step is installed at the bottom of the door.
能。
3.患者上下外门带防风撑杆,门上方设有外照明灯,门下部安装电
动翻转踏步。
4.  CT room dimensions: Length: 6200mm Width: 2360mm
1 set

Keywords: 12-meter medical examination vehicle

비즈니스 문의

성명을 입력하세요.
이 필드는 필수 입력 사항입니다.
문의 사항에 대한 세부 정보를 입력하세요.
이 필드는 필수 입력 사항입니다.
이 필드는 필수 입력 사항입니다.

유사한 게시물