รถบรรทุกขยะอาหารไฟฟ้า 12.5 ตัน

เอกสารสรุปผลิตภัณฑ์

The appearance is beautiful and generous. The horizontal cross-section of the trash can is square and round, and the vertical cross-section is a rectangular frame. Both sides are arc-shaped, making the whole machine look beautiful.

รูปภาพสินค้า

รายละเอียดสินค้า

ประสิทธิภาพหลักและคุณสมบัติ:
1. The appearance is beautiful and generous. The horizontal cross-section of the trash can is square and round, and the longitudinal cross-section is a rectangular frame. Both sides are arc-shaped, making the whole machine look beautiful and generous.
2. The bin body is made of high-quality carbon steel, with a thickness of 4mm at the bottom and 4mm on the four sides. The bin body is divided into two compartments: an upper compartment for solid waste and a lower compartment for sediment wastewater. The upper part of the wastewater tank is a filter net (made of stainless steel) to collect the liquid after solid-liquid separation. The upper front part of the bin body is a clean water storage tank, used for cleaning vehicles, etc.
3. The clean water tank is made of 304 stainless steel with a thickness of 3mm. A fire hydrant interface is set on the front right of the bin body for washing away residual garbage in the wastewater tank, etc. A large-diameter discharge ball valve is set on the rear right of the bin body for discharging liquid waste from the wastewater tank.
4. The garbage bin and the rear door assembly have good sealing performance. Imported silicone rubber is used for sealing, ensuring good sealing and preventing secondary pollution.
5. High reliability and safety. It adopts electric and hydraulic combined control and sets up a device to prevent misoperation to ensure the accurate and reliable operation of each mechanism.
6. A reversing camera is installed at the rear, and the cab has a reversing display screen with a size of 7 inches and infrared function, making operation more convenient.
7. Important components all use well-known domestic or foreign products:
Rear Control: Uses Eaton button panel from the USA, vehicle-grade standard, low failure rate;
Photoelectric Switch: Uses Shanghai-Sodilon, failure rate below 3‰;
Compaction Valve: Effectively improves the garbage-to-kitchen waste ratio, a core component of the kitchen waste truck;
Electrical Control Box Assembly: Uses Changsha-Forli CNA bus technology with diagnostic function;
Cab Control: Uses CAN assembly control panel, vehicle standard, low failure rate;
Hydraulic Cylinder: Uses customized cylinder, failure rate below 3‰;
Gear Pump: Uses Anhui-Wanliquid or Jiashan-Pawa cast iron pump, superior to aluminum shell pumps;
Power Take-off: Uses original factory or Jiashan power take-off to avoid gear breakage and oil leakage;
Pneumatic Three-Piece Set: Uses Taiwan-Airtac, including pressure reducing valve, filter, and oil fogger;
Multi-way Valve: Uses Yangzhou-Zhongmei integral valve, effectively reducing inter-plate oil leakage.

Keywords: 12.5-ton pure electric food waste truck

การสอบถามทางธุรกิจ